189
2-2.
Set/adjust the built-in extent Dimming Control
There is a simple control programme built into the unit that
provides 3 preset levels of brightness 100%, 66% and 33%;
along with 1 –hour delay-off timer which enable this unit to
operate the extent and convenient dimming control of lamps
in houses.
Connection using an external alternate switch for joint
operation of the dimming control is also included.
Detailed description of the operations and settings possible:
2-2-
A. Set the brightness with delay-off timer.
A-1. Touch both the ON and + buttons and hold for 3
seconds.
A-2. All Red LED indicators will be flashing.
A-3. Release de buttons
A-4. All Red LED indicators will turn off.
This setting will result the unit to operate:
when touch the ON button, the dimmer will provide 100%
output.
Touch the OFF button, the light will shut off.
Touch the + button, the dimmer will provide 66% output.
Touch the – button, the dimmer will provide 33% output and
will automatic shut off after one hour.
2-2-
B. Set the brightness without delay-off timer.
B-1. Touch both the ON an – buttons and hold for 3 seconds.
B-2. All Red LED indicators will be flashing.
B-3. Release the buttons.
B-4. All Red LED indicators will turn off.
This setting will result the unit to operate:
when touch the ON button, the dimmer will provide 100%
output.
Touch the OFF button, the light will shut off.
Touch the + button, the dimmer will provide 66% output.
Touch the – button, the dimmer will provide 33% output.
*2-2-
A and 2-2-B will not coexist in operating the dimming
control.
2-2-
C. “Recall last Brightness level” when set Dimmer to
operate and how to deactivate.
The unit’s conserves the last setting before switch off as
the default setting, ie it will operate the dimmer at the last
brightness setting before switch off. For convenience the unit
also allows the user to set 100% brightness and deactivate
the “recall last level brightness” as described below:
C-1. Touch both the OFF and + buttons and hold for 3
seconds.
C-2. All Red LED indicators will be flashing.
C-3. Release the button.
C-4. “Recall last Brightness level” has been deactivated.
2-2-
D. “Typical rocker-switch” as external switch.
This unit is able to accept joint-operation for dimming control
using another externally connected switch; both units can
form an alternate-switching control mechanism for the same
lamp. This unit is able to communicate with 2 different types
of external switches: Touch on/off switch and Typical rocker
switch.
The default setting in the unit is “Typical rocker-switch”.
Users can change it to “Touch on/off switch” when used as
the external switch, following the procedure described below: