207
7.
Delay-off Timer : Adjustable, ranges from 10 seconds to 5 minutes. Default
setting 5 minutes.
8.
Ambient light level detection : Adjustable, ranges from 10 to 100 Lux.
Default setting 100 Lux.
9.
Slide selector to manually switch light on or off.
10.
Dimension : 84 W x 84 H x 40.5 D mm.
Operation guide
1.
Do not connect this unit to aluminum wire. Use with copper or copper clad wire.
2.
Turn off the main before wiring.
3.
Remove BEZEL and existing switch from recessed conduit box if there is one
already installed.
4.
Connect the wires in the recessed conduit box, make sure no bare copper is
exposed. Secure connections with electrical tape.
5.
Mount this unit to the recessed conduit box.
6.
Adjust the Delayed-off-time and Ambient-light-level-detection if required.
7.
Turn on the main supply and start to use.
The content of each packaging box contains:
Light Switch ...................................…1
Self-tapping screw 4.6 x 24.5 mm …...2
Plastic anchor ø9 mm x 25 mm...........2
Machine screw #3 x 20 mm...............2
Instruction sheet .....……..............……1
Wiring
DANGER
READ ALL WIRE SIZING, VOLTAGE
REQUIREMENT AND SAFETY
DATA AVOID PROPERTY DAMAGE AND
PERSONAL INJURY
Electric Shock Or Fire Hazard
Disconnect the mains before wiring
Двухполюсный выключатель
Slide selector
ON– Light manually
switched on.
Auto– PIR/CDS in effects.
OFF– Light manually
switched off.
Delay off Timer
5
minutes 10 seconds
Default : Min
Ambient light level
Brightest Darkest
100
Lux 10 Lux
Default : Brightest
CDS Disabled
CDS Enabled(jumpered)
Default : Enabled
Reset key
Situated on the side
lower the front panel