209
NEW DOUBLE KEY TOUCH LIGHT SWITCH
FD28602/ FD28602-A/FD28602-M
This stylish unit is produced with touch-sensor technology, easy soft touch to
switch lights on/off at home.
Output by electro-mechanical relay is integrated to ensure high reliability
of operation. Exquisite electronic design of building a 2-channel (2-gangs)
lighting control in a compact front panel.
Specification
1.
Operating voltage : 230 ±10% Vac, 50~60Hz.
2.
Output : 2 sets of Relay output to control 2 separate lamps.
3.
Relay durability : 100,000 operations.
4.
Output rating : Lamp 1- 600 Watts/VA, any type of light.
Lamp 2- 600 Watts/VA, any type of light.
5.
Circuitry consumption : 1 VA.
6.
Technology : Touch sensor.
7.
Lighting strike protection.
8.
Elcetrostatic discharge protection.
9.
Operation status indicator : LED projects underneath the front panel.
10.
Mounting : 60 mm flush mount.
Operation guide
1.
Do not connect this unit to aluminum wire. Use with copper or copper clad
wire.
2.
Turn off the main before wiring.
3.
Remove BEZEL and existing switch from recessed conduit box if there is one
already installed.
4.
Connect the wires in the recessed conduit box, make sure no bare copper is
exposed. Secure connections
with electrical tape.
5.
Mount this unit to the recessed conduit box.
6.
Turn on the main supply and start to use.
Each packaging box contains:
Light switch................................................1
Plastic anchor ø9 mm x 25 mm....................2
Self-tapping screw 4.6 x 24.5 mm................2
Machine screw #3 x 20 mm........................2
Instruction sheet..........................................1
Wiring
DANGER
READ ALL WIRE SIZING, VOLTAGE
REQUIREMENT AND SAFETY
DATA AVOID PROPERTY DAMAGE AND
PERSONAL INJURY
Electric Shock Or Fire Hazard
Disconnect the main before wiring
Refers to the graphic description below to Connect the unit to the main supply
Control over two lamps with this unit
Examples of extent application
2-
way manual alternative switch operation --With 2 units of FD28602
2-
way manual alternative switch operation --With 1 unit of FD28602 and 1
typical wall switch