MARCO CATALOGUE BY FEDE PLUS ENGLISH 2018

36 PUSH BUTTON MECHANISMS MÉCANISMES BOUTTON-POUSSOIR MECCANISMI A PULSANTE MECANISMOS PULSADORES DRUCKTASTER MECHANISMEN FD16516 10A 250V~ Push-button Pousse-bouton Pulsante Pulsador Drucktaster FD16599 Push-button with temporized switch and diffuser. Timing 3 min. Max 500W incandescent 230V~ Bouton-poussoir avec interrupteur et diffuseur temporisé. Synchronisation 3 min. Max 500Wà incandescence 230V ~ Pulsante con interruttore temporalizzato e diffusore. Tempo minimo 3min. Max 500W incandescente 230 V ~ Pulsador con interruptor temporizador y difusor . Tiempo 3 min. Max 500W incandescente 230V~ Taster mit zeitlich einstellbaren Schalter und Diffusor 3 min. Max 500W Glühlampe 230V FD-LD220 Dimmer for LED lamp Power: 200W 230V 50/60 Hz Installed in the mounting box behind the push button. Dimensions: 56 x 22 mm Units: 1 FD-LD220WCM LED dimmer with Bluetooth® Power: 200W 230V 50/60 Hz Installed in the mounting box behind the push button. Dimensions: 50 x 15.5 mm Units: 1 LD200KRON 2 channel dimmer for LED lamp Power: 2x100W 230V 50/60 Hz Installed in the mounting box behind the push button. Dimensions: 57 x 21 mm Units: 1 FD-LD440 Dimmer for LED lamp Power: 440W 230V 50/60 Hz Installed in the mounting box behind the push button. Dimensions: 56 x 22 mm Units: 1 Dimmers for Push Buttons FD-LD100, FD-LD220 and FD-LD440 Universal push dimmers FD-LD100, FD-LD220 and FD-LD440 Universal LED-dimmers for wallbox installation that starts at 1W A common problem - when dimming LED lamps and CFL lamps - is that conventional dimmers usually require a high minimum load of 50W, 35W or 20W, while low energy light lamps and LED lamps have a power range from 1W up to 20W. For dimming of these low energy lamps dimmers that can operate from 1W and up are required. The series of universal push dimmers starts already at 1W for dimming of both lowpower lamps as well as electronic transformers, dimmable LED-drivers and incandescent lamps. Adjustable minimum dimming level Depending on the type of load that is connected to the dimmer, the dimmer’s lowest dimming level can be adjusted to fit the load in question. The dimming characteristic is distinguished between different types of loads. This feature is perfect for use when there is mixed loads of different lamptypes including dimmable halogen and incandescent lights. It is also very handy if the user at some future date decides to switch from incandescent to 230 VAC dimmable LEDs. Then you need only adjust the lowest dimming level to the new load, instead of buying a new dimmer. Memory function Equipped with memory function that also remains after power failure.